|
Post by linus69 on Apr 9, 2008 11:20:26 GMT -5
Yes Ken, I`m not sure of the correct spelling but thats the name that finally came to my mind, it was making me nuts that I couldn`t remember it.
Paul
|
|
|
Post by bradblazer on Apr 9, 2008 18:47:14 GMT -5
Paul: If it is Italian, then it would be made by Dinoil (or Dinoili ;D ). I thought that was in Alaska Rob - can you play with that valve to figure out why it wants to deadhead?
|
|
3RRL
Administrator
Huge Kama
Posts: 2,027
|
Post by 3RRL on Jun 19, 2008 18:14:54 GMT -5
P.S. - Damnit -How come my Chinese did not come out like your Chiese Because I am fluent in copying Chinese. ;D Anyway, regarding the question I asked ( in Loretta's thread) about why the ZL-20 valve is screwing up, the photos in the first couple posts show that the linkage for the joystick are good on both valves. I did not mess with either of them. Ronald's valve works great and the ZL is not. The spring loaded return to center was working just fine when I first remounted it. I'll have to disassemble the valve to get to the bottom of it, I guess?
|
|
|
Post by Ranch Hand on Jun 19, 2008 21:42:39 GMT -5
Rob, the few China loader valves that I have had apart .......... the spool valves are very loose in there cylinder. Sloppy machine work in my opinion. When you have this it makes it very hard to control fluid flow.
Quote; I'm not so sure I understand what rapid regen means exactly,;Quote.
Some of the fluid that is leaveing one side of the hydraulic cylinder is being use to help speed up the other side.
Ronald Ranch Hand Supply
|
|