Post by linus69 on Feb 11, 2008 11:06:43 GMT -5
This is not my mod I got it froms Johns Tractor.
www.johnstractor.com/FELsupport.html
It went pretty much as is shown in the link, the axle bolts I got at NAPA part #650-4003 they are 1/2in. and were $8 each.
The box steel was quoted to me at $73 for an 8ft length, a buddy had a spare piece for me.
I went an inch longer at 46ins as I wanted more steel in front of the axle bolts.
What is not mentioned in the instructions for this mod is that you must remove, and that you lose your driver step. So I welded a running board style step on the drivers side support. I can`t get along without a step.
I would say this is a great mod for anyone who uses their stock loader hard as I do, and it looks good, looks like it should have always been there.
www.johnstractor.com/FELsupport.html
It went pretty much as is shown in the link, the axle bolts I got at NAPA part #650-4003 they are 1/2in. and were $8 each.
The box steel was quoted to me at $73 for an 8ft length, a buddy had a spare piece for me.
I went an inch longer at 46ins as I wanted more steel in front of the axle bolts.
What is not mentioned in the instructions for this mod is that you must remove, and that you lose your driver step. So I welded a running board style step on the drivers side support. I can`t get along without a step.
I would say this is a great mod for anyone who uses their stock loader hard as I do, and it looks good, looks like it should have always been there.