Fuel and coolant lines for a JM 354

[kbone1]

This thread is mostly directed towards Larry G. I read a recent post of his and he told of replacing his coolant and fuel lines due to the crappy Chinese rubber. He listed what NAPA hoses he used for the radiator upper and lower hoses. My questions are; What did you use for the crossover hose from the thermostat to the water pump?, What size/type of hose did you use for your return fuel lines and the fittings on either end? (one screws into the fuel tank, the other comes off of the end of the fuel pump.)
What type of hosedid you use for the block coolant drain. I tried to PM Larry about another question but I guess I did not do it right. I decided to post these questions on the open forum for the benefit of all. My JM 354 has the 395 E3 engine, which I believe Larrys does also. If larry or anyone else knows the answers to these questions please reply.

Thank you,
kbone1

[GuglioLS]

Kbone1,

I did get your PM dated 4/22 and replied 4/22 check your PM's.
From the home page of the forum scroll all the way down to the bottom, on the lower right you should see the words "Your Personal Messages" click on that to get to your in-box.
The hose specs you seek are spelled out in the threads you found.

Larry