Home Made Front Hitch for my Jinma

[mrmikey]

Looking good Nuno, fine job as usual.....Mike

[nuno]

bracabric

yes, i am 100% sure this masterpiece of Chinese high technology is a Jinma.
The Paint looks more different on pictures because of the Flash Light, in real it looks more like the John Deere Green or maybe somthing between Deere and Deutz


bradblazer

yes, must relocate the Licensplate because of the Road Traffic Laws here in Germany.
When i do Painting Jobs i use an HVLP Paintgun, this guns make a less of dust than an normal Paintgun but you are right, a good ventilation and mask is indispensable.
About the Snow blade, i decide not to build an Snow Blade because of various reason and take a look at roadsweeper and this is the reason why it takes a lot of time to finish the Front Hitch

[Rich Waugh]

That looks like a winner so far, Nuno!

Happy Birthday!

[nuno]

Thank you, Rich.

i finish the Sweeper last Week and it looks like it is only the second Place and not the Winner



something must have gone wrong with my Hydraulic Calculations and the Hydraulic Motor have only 53 rpm (in the calculation 89 rpm)
so the Brush will make only 106 rpm (ratio 1:2) and not 178 rpm like i have calculate.
But a first Test ride on a Parking Lot near me was positive and i hope i will work also on Snow.

i made a little Video of the first Run (not the Test ride)



p.s. Date and Hour in the Video is not correct and about the flashing Battery Light in the Dashboard, i give up to search for the Reason why this Light is flashing until i step on the Brake pedal for the first time