Post by tuffytractor on Feb 10, 2008 17:07:20 GMT -5
Here are some pictures of what my 4in1 FEL valve looked like when I got it.
While I was doing the upgrade I figured I would go ahead and remove the in tank Paper Filter and cut off the flow restrictions that it may have, as recommended by Ronald @ Ranch Hand. I also inserted all the necessary adapters to allow the hoses to connect via JIC.
I also installed an electrically activated 3rd function for the clamshell, stole this idea from Rob (3rl), he said he wouldn't mind. This is what it looks like installed, along with a pressure guage to complete the remodel.
The replacement of the valve and clearing the restrictions from the tank gained me 4 seconds, but the action of the valve is very smooth and predictable. Later I was able to replace the Gear Pump, which brought the time down to a usable level. Look here for the gear pump info. chinesetractor.proboards66.com/index.cgi?board=hydraulics&action=display&thread=1202019149
Last Edit: Feb 10, 2008 17:16:51 GMT -5 by tuffytractor
Jinma 354 4 Cyl Y485T, 4in1 FEL, Bush Whacker Brush Cutter, LW-6 Backhoe, 2G2 6' Gearmore Hyd Box Scraper, Forks w/Backer