|
Post by Rob on Sept 30, 2017 19:43:15 GMT -5
I have a Komatsu D20 a adjusted the left brake band when it gets hot it pulls the motor down now like the clutch not disengaging can you help
|
|
|
Post by Albidar on Nov 4, 2017 21:41:43 GMT -5
How you remove the steering drum.? because, after i remove all bolt at the side steering drum, the drum can't remove or lifting up... After getting everything cleaned up with allot of sand blasting I painted a few parts and put it all back together. The last picture shows the New Clutch / break drum installed, all new clutch plates and friction disks (inside the drum and cant be seen) and around the outside a new break band. Looks like new. I sure hope it works after putting it all back together. Ive got at least 40 hours into it at this point. After tightening the last bolt I could hardly wait to feel the results of all that work. After taking it for "A spin around the park" I must say it steers as smooth as silk now, it feels like a new machine with power steering. I am soooooo excited and happy I was able to pull this off and get it completely restored. I'm really enjoying my Dozer now! Thanks for checking this out. Larry
|
|
|
Post by dayin on Dec 26, 2017 20:05:39 GMT -5
Okay I got all the bolts out on the both side plates on the clutch I'm I got the drum slide over but now I'm stuck there I can't figure out how to get the clutches of slide out anyway you can help me out
|
|
|
Post by Johnboy on Jun 7, 2018 20:43:21 GMT -5
Awesome post, I have a d21a-6 with dry clutches, i recently replaced the steering clutches and brake bands, but am having a hell of a time with getting the brake bands hooked back up when installing the clutch housing covers. Desperately need some tips!
|
|