|
|
Post by dave354 on May 15, 2011 13:44:23 GMT -5
I would like to put a relief valve in my hydraulic line at the pump, can
someone tell me what kind of valve to use? I have a jinma 354 machine
|
|
arto
CTW Member
Posts: 9
|
Post by arto on May 16, 2011 9:36:55 GMT -5
I would like to put a relief valve in my hydraulic line at the pump, can someone tell me what kind of valve to use? I have a jinma 354 machine You should use a adjustable PRV, rated for your max pump flow. I would also go with one that has a manometer port. I have one of these types in my Mahindra 254. But with a knob to adjust the pressure. www.flowfitonline.com/acatalog/Online_Catalogue_RELIEF_VALVES_326.html I Upgraded to this when I change to a 25CC pump from a 15CC. Needed one that was adjustable and could "swallow" the flow at relief. |
|
|
|
Post by quicksandfarmer on May 24, 2011 13:33:10 GMT -5
When you install a relief valve it has to relieve to somewhere, which is a problem on my 354. The only return to tank I have is from the power steering and I don't see any way of tapping into that line, and it's pretty small.
I think what you would have to do is drill into the lift box and then thread the hole for pipe.
|
|
