nuno
CTW Member
Posts: 26
|
Post by nuno on Jun 19, 2012 1:12:01 GMT -5
Hey Guys,
yesterday i have to move a few cubic meters of Dirt. I load my trailer two times with soil and when i start the Tractor for the third Load i hear two strange noises like as if something break. Since this i have no Clutch, can not engage any Gear an there is an very loud scratching noise from the Bell housing. I stop the Tractor immediately but i have to start it one more time to take it out of the working area and bring it in position so that i can pull the Tractor with a winch on a Trailer.
it was late when i arrived home so i have only time to remove the FEL but not the FEL Bracket to take a look into the Bell housing.
has someone an idea what it could be or any advice?
|
|
|
Post by affordable on Jun 19, 2012 5:45:15 GMT -5
There were some main clutch discs years ago, that when under alot of pressure would break all the rivets that held the hub to the disc. From what you are describing that may have happened One you get inside to take a look, see if there are some small rivet pieces inside of the bell hosing Tommy Affordable Tractor Sales "Your Jinma Parts Superstore" www.affordabletractorsalesco.com
|
|
nuno
CTW Member
Posts: 26
|
Post by nuno on Jul 11, 2012 14:30:38 GMT -5
Thank you for reply Tommy, i have a lot of Work to do so i doesn't have the time to start to look whats happen inside the Bell housing until today. at first i turn the Flywheel to take a look if something is broken an there it is one of the Axis Pins from the Clutch Finger is broken and tomorrow i will take a look inside with an Camera to see if there is something more broken.
|
|