|
Post by dave354 on Oct 17, 2012 16:57:08 GMT -5
I have a 354 jinma tractor that is blowing the main 30 amp fuse. I was using the tractor and everthing was running normally. I shut it down for some lunch and when I came back to start it up that is when it started blowing the fuse. When i turn on the switch the power comes on but when I go to start mode , fuse pops. The tractor is in neutral and the clutch is in to engage the switch. I suspect maybe it might be the starter solenoid. Any ideas on what my problem might be? Thanks
|
|
|
Post by Rich Waugh on Oct 18, 2012 1:54:33 GMT -5
Could be that the clutch interlock switch is shorting to the frame, or you could have a problem with the voltage regulator. Mine did that and it was the voltage regulator not making good contact in the socket.
|
|
|
Post by dave354 on Oct 22, 2012 11:37:23 GMT -5
Thanks , Rich It was the switch that was grounded.
|
|