lj
CTW Member
Posts: 6 
|
Post by lj on Nov 9, 2013 21:19:24 GMT -5
The 3 point won't work but the front bucket works fine. Any Ideas! Larry.
|
|
PJ
CTW Expert
Posts: 176
|
Post by PJ on Jan 4, 2014 10:00:32 GMT -5
I haven't been here for some time. You probably figured out your problem by now, but just in case, does your tractor have the link I show in the photo with the blue and yellow arrow? If it does, make sure it's hooked up, with this link unhooked your three point won't work as it should. This is disconnected after a 3 point back hoe is mounted. PJ  |
|
lj
CTW Member
Posts: 6
|
Post by lj on Jan 5, 2014 2:23:18 GMT -5
I don't have that hook-up. After rebuilding the 3pt with no results I started taking lines apart to see where I had flow (which I should have done to begin with). It ended up being a seized power beyond valve up by the loader control. Larry.
|
|
PJ
CTW Expert
Posts: 176
|
Post by PJ on Jan 5, 2014 6:51:43 GMT -5
Nice you have it figured out! Sometimes things like this can surely try ones patience.PJ
|
|
lj
CTW Member
Posts: 6
|
Post by lj on Jan 6, 2014 20:32:28 GMT -5
I tried soaking the valve in a 50/50 acetone and atf mix, and it didn't free it up. Went online and couldn't find the valve. Tommy at Affordable Tractor told me it was a cross valve. I gave the block number to a local hydraulic shop and it came back to a totally different item. I sent pic of valve to them and they forwarded it to cross. The valve is available so I ordered it, it was $26.75 and will take 7-10 days. Larry.
|
|
lj
CTW Member
Posts: 6
|
Post by lj on Dec 18, 2014 17:54:27 GMT -5
I need to update on this. The valve wasn't a power beyond and wasn't bad. Ended up being two lines hooked up wrong and it came that way, still had original ties on the lines which means they hadn't been changed.
|
|
