ronj
CTW Member
Posts: 72
|
Post by ronj on Aug 13, 2009 3:46:58 GMT -5
OK, I cut one inch off the bottom of the rear cylinder mounts and this is what the jaws look like in the retracted position. My concerns about the cylinder body clearance are now relieved. Finally, I checked the jaw stops that Larry made and they look like they will work fine. Now I’m ordering the hydraulic hoses, fittings, etc. Ron
|
|
GuglioLS
Administrator
Jinma354 LE
Posts: 1,276
|
Post by GuglioLS on Aug 29, 2009 7:45:15 GMT -5
Looking good Ron,
It's been a couple of weeks since your last post. How's it going? Did you get all the hydraulic hoses and fittings? Are you close to being finished? I'm anxious to see the finished product.
Larry
|
|
ronj
CTW Member
Posts: 72
|
Post by ronj on Sept 1, 2009 1:45:30 GMT -5
Larry, Still working at it. Got the hydraulic stuff day before yesterday. Here is what the jaws look like now. We're starting to get our normal (Pacific Northwest) rain and I need to get some things done before the rain really sets in. I'm also anxious to see it actually working. RonJ
|
|